Dutton-Lainson Company

Removable wheel, fits model 6418 jack only. Includes quick-attach pin for easy removal. 1000 lb capacity. Zinc TUFFPLATE finish.

Features heavy-duty 8 inch slotted independent wheel with bearing, to maneuver over rough terrain when moving trailer manually. Reinforced wheel bracket also adds strength. 4-bolt swivel mounting system for heavier applications. Zinc TUFFPLATE finish. 1500 lb capacity. Fits tongues up to 3 x 5 inches.

Fits model TW4000 built prior to 2014. 25 ft power cable, 8 ft ground cable. #12 wire with 35 amp circuit breaker.

15 foot heavy duty winch strap with hook, with breaking strength of 6600 lbs, for winches up to 3700 lbs (strap rating must be 150% of winch rating). 2 inch width. Mounting hardware included.

CSA APPROVED 120 Volt Electric Winch has 10 foot, 3-wire grounded power cord. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 50 ft of 3/16 aircraft cable, pulley block, and snap hook. 1800 lb capacity when double-lined. Emergency crank handle also included in case of power loss. Similar to SA7000AC, but with additional features REQUIRED IN CANADA. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

Brake winch safety and rugged construction at a more economical price. Raise and lower loads with minimal effort, with load locked in place, even when handle is released. 2500 lb capacity, powder coated copper bronze finish. 175 lb minimum load required for winch to operate properly. Handle included.

Model 6346 12 in. Keel Roller - Fits 5/8 Shaft

120 Volt Electric Winch with factory-installed remote control (handheld pendant switch with 10 ft cord) has 10 foot, 3 wire grounded power cord. Power in, power out, controlled freewheeling clutch, and automatic brake. Comes loaded with 50 ft of 3/16 aircraft cable, pulley block, and snap hook. 1800 lb capacity when double-lined. Emergency crank handle also included in case of power loss. For applications with access to AC power: Boat lifts; Boat davits; Frame-straightening machines (to pull disabled vehicles up onto machine); Light towers; Marine railway systems; Greenhouse ventilation systems; Aircraft hangars (to pull small aircraft in and out); Opening/closing large horizontal sliding doors; Dumb waiters; General material handling applications. What makes StrongArm® electric winches different? Design: -is more compact, allowing it to fit into tight spaces. -is safer, as cable is enclosed inside the cover. On open-reel models, fingers can get caught in cable as it’s reeled in, and any frayed strands can cause cuts. -protects cable, so it’s not exposed to the elements, which accelerates wear and rusting. Unique features: -Clutch release. User can pay out load in neutral and still control it with clutch mechanism. -Spur gear system vs. planetary gears. A planetary gear system generates much more heat, and draws more amps from the power source. Because the motor and gears are attached directly to the spool, the heat build-up from running the winch transfers directly to the drum and cable. In contrast, the StrongArm winch’s spur gear system is much more efficient, it gives off less heat and draws fewer amps. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 3 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.