Dutton-Lainson Company

Handy item that provides quick, safe, and reliable wire connection for all 12 volt DC StrongArm electric winch models and model TW9000. Can also be used with 12 volt remote switch kits. Fits 8 gauge wire. Splice mating connectors into wiring harness, so that wiring harness can remain wired to battery when trailer is not present. One connector can be attached to the bottom of the bumper, and the other goes with the winch (and the shorter section of red wire). When ready to use the winch again, just plug the two connectors together. Optional dust cover (24087) sold separately.

20 foot heavy duty winch strap with hook, with breaking strength of 6600 lbs, for winches up to 3700 lbs (strap rating must be 150% of winch rating). 2 inch width. Includes mounting hardware.

12 Volt Electric Winch is powered by your vehicle battery, using wiring harness (included). Power in, power out, controlled free wheeling clutch, and automatic brake. 3000 lb. load capacity. Comes loaded with 25 ft of 7/32 aircraft cable, and snap hook. Emergency crank handle also included in case of power loss. DC Winches are great for mobile applications, or around water. Mount on ATV’s; Race car trailers (also for moving extra tires); Antique car trailers; Boat trailers; Hay bale moving; Livestock feeding equipment; Large livestock trailers; Boat lifts; Articulating conveyors. What makes StrongArm® electric winches different? Design: -is more compact, allowing it to fit into tight spaces. -is safer, as cable is enclosed inside the cover. On open-reel models, fingers can get caught in cable as it’s reeled in, and any frayed strands can cause cuts. -protects cable, so it’s not exposed to the elements, which accelerates wear and rusting. Unique features: -Clutch release. User can pay out load in neutral and still control it with clutch mechanism. -Spur gear system vs. planetary gears. A planetary gear system generates much more heat, and draws more amps from the power source. Because the motor and gears are attached directly to the spool, the heat build-up from running the winch transfers directly to the drum and cable. In contrast, the StrongArm winch’s spur gear system is much more efficient, it gives off less heat and draws fewer amps. NOTE: THIS WINCH IS BUILT FOR HORIZONTAL PULLING. FOR VERTICAL LIFTING APPLICATIONS, WE RECOMMEND ORDERING A WINCH WITH NO CLUTCH INSTALLED. PRICE IS THE SAME. NOTE: MAXIMUM RUN TIME 4 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

Similar to 24870, but NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people, or loads over where people could be present. NOTE: MAXIMUM RUN TIME 4 MINUTES. SEE OWNERS MANUAL FOR MORE DETAILS.

1200 lb brake winch for industrial use. Extra heavy duty construction for long life. Gear cover enclosed braking mechanism, 1-1/8 inch reel hub diameter. Load locks in place when handle is released. Great for grain augers, boat lifts, pickup cranes, etc. Lift and lower with ease. 75 pound minimum load required for winch to function properly. Zinc TUFFPLATE base and hardware, powder coated black reel. Handle included. NOTE: For boat lift applications, handle may be replaced by large wheel (supplied by lift manufacturer).

For model TW4000 only, fits 12 gauge wire. Splice mating connectors into wiring harness, so that wiring harness can remain wired to battery when trailer is not present. One connector can be attached to the bottom of the bumper, the other goes with the winch (and the shorter section of red wire). When ready to use the winch again, just plug the two connectors together. Optional dust cover (24087) sold separately.

25 foot heavy duty winch strap with hook, with breaking strength of 6600 lbs, for winches up to 3700 lbs (strap rating must be 150% of winch rating). 2 inch width, mounting hardware included.